WIRELESS BUGS NEVER STOOD A CHANCE AGAINST THE PROFESSIONAL DIGITAL RF WIRELESS BUG DETECTOR

It would be difficult to recommend anything other than a professional RF detector. This device is in a class all of its own and one of the easiest-to-use counter-surveillance devices available. Its accuracy level is spot on and has the ability to visibly show you exactly what type of signal is being detected exactly when the signal is found.

This requires no guesswork, no maybes, and turns anyone into a counter-surveillance master in minutes. While other sweepers show an intensity bar, the professional bug sweeper offers an unmistakable level of identification. Two antennas can be interchanged for location distance, audio, visual, vibration feedback, and the ability to create a loopback effect when the bug is close. This makes sweeping simple and painless.

Modern bugs can be very sophisticated, and it has become increasingly necessary to have a signal scanner capable of combating them. Many modern devices utilize Bluetooth, WIFI, GSM, and other frequencies unnoticed by comparable detectors. The professional-level wireless scanner looks at these modulations and can even locate the sneakiest equipment at low transmitting power.

When the device crosses a signal, it will light up the bar graph, intensify the demodulation, and light up the corresponding detection color to indicate what type of signal is found. Antenna one is used to identify classical style bugs, while antenna two is for spotting modern equipment.

Using these two antennas in a search will lead to more precise results when dealing with illicit eavesdropping, while false positives can be identified with the correlation mode. The suspicious signal's probing is performed when the CORR button is active while not disrupting the environment.

Check for bugs in offices, rooms, homes, vehicles, body transmitters, or potentially compromised equipment such as printers and WIFI-enabled devices. This device also comes with a Micro pointer antenna to pinpoint the transmitter's location for short-range signal isolation.

HOW DO YOU SWEEP A ROOM FOR TRANSMITTING DEVICES?

The Pro RF scanner is straightforward to use at its most sophisticated level. No prior knowledge or special training is required to clear any environment for illicit eavesdropping equipment. It is recommended that a few steps are taken before a sweep and, since situations do vary, to consider what suspicious activity has been associated with the former.

If an office scan is needed, performing these during office hours is best, while a home sweep is best performed during high traffic. The advanced activation of remote-controlled bugging devices is why such a precaution should be taken. Otherwise, the results will be dependent on the design of the illegal device. When you're about to perform a search, exit the environment and activate the professional signal scanner. The device will default into antenna one for general RF signal sweeping.

If feedback is desired, the mode button will activate vibration, acoustic, or both to give another notification level. The acoustic mode can provide a loopback effect when the unit is close to an FM-modulated transmitter. Enter the area and begin to perform the sweep. Probe all objects in the area and take your time performing the scan.

If a strong signal is found, move the signal detector back and forth slowly towards the suspicious location, closely watching the bar graph display. It is recommended that a CD or noise is present to activate any noise-activated devices that wouldn't be transmitting if there was silence.

Detection distance varies depending on the antenna used, but the range is between 10cm-2m from a transmission. This is to eliminate any cross RF signals that could interfere with a sweep. The bar graph displays 16 different sensitivity levels; you can force the device to focus in with ATT+ for close isolation detection or broaden your detection area with ATT- to increase the detection range.

If a strong signal is detected, activate the CORR button. This will create a loopback effect and spike the demodulation indicator, or if the acoustic mode is active, create audio feedback in synchronized correlation. Two scans are recommended. Suppose a signal has crossed a corresponding blue color for Bluetooth, Green for WIFI, Red for Mobile, and Orange for DECT cordless landline phones, along with the signal strength indicator bar.

Perform a scan with each antenna to find classical and modern bugging equipment. It is possible to achieve a false positive. Phantom signals, metal, wires, or similar objects may spike the bar graph since metal can be an antenna extension. Windows or other open areas can also amplify the detector since radio waves could be present nearby.

A physical search of any probed area highlighted with the Pro RF detector is vital to a successful sweep, but don't stop if a device is found. It is quite common for multiple bugging devices to be present in many cases, and some bugs are easy to find and are intentionally designed to distract from more well-hidden equipment.

IF IT'S TRANSMITTING, YOU WILL FIND IT WITH THE DIGITAL RF WIRELESS BUG DETECTOR

Are you tired of the guesswork? Do you want professional-level equipment at a consumer price? Do you want one of the best bug detectors on the market today? Then this bug sweeper is hands down the right choice. The Professional signal detector is easily one of the best signal detectors on the market today. This device feels and performs like the industry Goliath that it is with a metal, high-quality design. The indication lights give an easy-to-read, accurate display, and when performing a sweep, it provides instant identification. Take out the guesswork and utilize the multi-signal 2 MHz -12 GHz detection range to pinpoint an eavesdropping device's exact positioning with the new micro-pointer antennae. There really isn't any comparison to this bug detection unit, so sweep like a professional the first time.

FEATURES

• 16-segment bar graph indicator providing a wide dynamic range
• The correlation function discovers FM-transmitters by the presence of sound
• Detects GSM, GPS, LTE, Wi-Max, Bluetooth, WIFI 2.4GHz-5GHz, RF, and wireless video cameras
• A durable metallic body that is handheld and portable with three alert modes sound, vibration, and mixed
• Helps to locate wireless frequencies from bugs, hidden cameras, tapping devices, transmitters, receivers, and GPS trackers
• Increased sensitivity to Bluetooth and WIFI signals. Allowing the operator to detect wireless sources at a distance of up to 6 feet
• The Main antenna boasts a coverage range of 50 MHz-12000 MHz, which is particularly helpful for lower frequencies and has made it possible to increase the detection distance of conventional VHF/UHF bugging devices by 2-3 times while saving perfect sensitivity for higher frequency bands like GSM, WIFI, Bluetooth
• The correlation function discovers FM transmitters by the presence of sound. Making this unit more versatile than other detectors. This unit can produce a loop-back effect that a microphone transmitter will pick up the sound and transmit the beep. The demodulation display will pick up the transmission and flash simultaneously. 
• Antenna two provides coverage for frequencies ranging from 1.4-2.48 GHz and 4.9-5.875 GHz. This microwave log-periodic directed antenna can detect frequencies 2-4 times further on signals above 2 GHz like 2.4, 5.0 GHz WIFI, Bluetooth, Wi-Max, and LTE High. The directionality provided makes pinpointing a wireless source easier to locate. Now you not only know that there is a WIFI source but can quickly pinpoint it.

Check Out These Related Anti-Spy Devices

Hidden Camera Detector With IR Finder

Signal Blocking Pouch